LOCK LUBRICANT

锁具专用润滑脂·锁具专用解冻剂

简单说明：

汽车锁具解冻及润滑专用脂

详细说明：

产品简介
它是一种汽车锁具通用保养润滑脂

主要功效：
1、它是一种通用产品，内含解冻剂和专用润滑材料；
2、渗透力极强，易于扩散，快速解冻，恢复锁具的运动特性；
3、含有防腐剂，还可防治生锈。

使用方法：
摇匀气雾剂内容物；
向锁孔内喷射2-3秒即可。




Aerosol penetrating spray grease for car locks.

* Lubricates and assures easy operation of the lock mechanism.
* Removes moisture from the surface of the parts and protects them from corrosion.


APPLICATION INSTRUCTIONS:
1. Shake the can.
2. Spray the content (2-3 sec.) into the keyhole.

TAR STAIN REMOVER

汽车交通-是XADO最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。

沥青清除剂

简单说明：

用于去除沥青斑点

详细说明：

产品简介：
能安全而快速清除汽车表面的沥青斑点。

主要功效：
1、可去除玻璃、金属、漆面、镀铬件表面的沥青斑点；
2、清除尾气排放痕迹（积炭、油渍）；
3、可应用于去除旧的防腐和防打击保护层。

使用方法：
1、摇匀气雾剂内容物；
2、在待处理表面喷上该产品；
3、5-10分钟后，用海绵擦拭或者用水清洗即可。

备注：
不能用该产品清洗皮件；
不要滴落在塑料件和号码牌上！如果不慎滴落，请立即用清水冲洗。
对任何类型的漆面均无不利影响。



Spray designed to remove tar stains.



Quickly and effectively removes tar stains from the surfaces of a car.

• Cleans glass, metal, pain and chrome-plated parts from tar stains.
  
  
• Removes exhaust spots (soot and oil).
  
  
• Used to eliminate the previous anti-corrosion and anti-gravel coating.
  

APPLICATION INSTRUCTIONS:

1. Shake the can.
   
2. Spray onto the surface to be cleaned.
   
3. Wipe off with a sponge or wash with water after 5–10 seconds.
   

Note

Do not use for leather cleaning!

Avoid getting onto non-painted plastic parts of a car body or number plates! If occurred, wash off with water immediately!

Neutral to lacquer coatings of any type.

DASHBOARD POLISH

汽车交通-是XADO最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。

仪表台上光护理剂


简单说明：

用于汽车驾驶室内塑料及木饰材料的护理

详细说明：

产品简介：
用于清洗和翻新汽车室内装饰材料，包括前仪表台、仪表板和其它塑料、木饰、皮革及乙烯基材料。它能有效清洗表面脏物，防止零部件表面龟裂。

主要功效：
1、轻松进入表面微裂纹内，清洗其内部脏物；
2、翻新塑料件和木饰的外观，赋予其柔和的光泽；
3、赋予表面良好的抗静电能力，处理后不易落灰和弄脏；
4、处理后的表面不会再形成油脂膜；
5、预防塑料件的龟裂并防止其在日光照射下脱色。

使用方法：
1、摇匀气雾剂内容物；
2、将少量清洗剂喷在待处理表面上；
3、用抹布擦拭即可。

备注：
无需长时间抛光！

专家建议：
如果经过一段时间光泽变的黯淡，用抹布直接擦拭即可恢复（无需再喷上光剂）。





Product designed to take care of plastic and wooden parts of a car compartment.


Efficient product designed to clean and refresh parts in a car compartment (control panel and other plastics, wooden, leather and vinyl parts). Efficiently cleans the surfaces from contaminations and protects them from cracking.

• Easily penetrates into the smallest scratches on the surface of the parts and removes dirt.
  
• Refreshes the appearance of plastic and wooden surfaces and makes them shine.
  
• Gives anti-static properties to the surface, thus, it gets less dirty and dusty.
  
• Does not leave any greasy film after usage.
  
• Prevents plastics from cracking and its fading in the sun.

APPLICATION INSTRUCTIONS


1. Shake the can.

2. Spray a small amount of the product onto the surface to be cleaned.

3. Wipe off with a cloth.



Note

Does not require a long-term polishing.



Expert's Advice:

If with time the shine is gone, wipe the dashboard with a cloth again (without the polisher). The shine will reappear.

LEATHER CARE

汽车交通-是XADO最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。

皮革护理剂

简单说明：

对汽车驾驶室皮革进行专业有效的护理

详细说明：

产品简介：
专门用于护理汽车室内天然和人造皮革，包括座椅、门、仪表台等。内含蓖麻油。

主要功效：
1、快速渗入皮革组织，清除各种脏物；
2、恢复皮革的弹性；
3、抚平微细裂纹，恢复光泽；
4、予抗静电特性；
5、予皮革防水和防灰尘性能；
6、预防皮革老化和日晒后脱色。

使用方法：
摇匀气雾剂内容物；
直接将少量护理剂喷在皮革面上；
用抹布擦拭即可。






Safe and effective care of leather surfaces in a car compartment.



The product is designed to take care of natural and artificial leather upholstery (seats, doors, panels, etc.). Protects surfaces from alligatoring, cleans them from contaminations and makes leather more elastic.

• quickly penetrates into the leather structure and removes contaminations;
  
  
• restores leather elasticity;
  
  
  
• covers small cracks and gives a shine to the finish;
  
  
• provides upholstery with antistatic properties, it becomes less dusty;
  
• the processed leather is stable to moisture and dirt;
  
• prevents leather aging and fading in the sun.
  
  

Application instructions:

Shake the can.

Spray a small amount of the product onto leather surface.

Wipe off with a cloth.

CARBURETOR AND INJECTOR CLEANER

汽车交通-是XADO最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。

化油器及喷射器清洗剂

简单说明：

多功能化油器清洗剂

详细说明：

产品简介：
用于快速而高效清洗化油器、节气门阀体、进气道和供油道等，能轻易清除汽车燃油系统内的各种脏物（包括漆类、润滑油及燃油膜、积炭、胶质、灰尘等）。

主要功效：
1、清洗化油器零部件（阀体、浮箱、喷嘴、管道），恢复其额定功能；
2、恢复电喷车节气门的运动性；
3、清除进气道和供油通道的脏物；
4、提高发动机功率，改善加速性；
5、减少有害气体的排放；
6、节约燃料消耗；
7、对氧传感器和三元催化器无副作用。

使用方法：
用于化油器
1、取下空气滤清器；
2、启动发动机；
3、摇匀气雾剂内容物；
4、足量喷洗化油器的所有可见零部件，在清洗时应使发动机处于高怠速状态。

用于电喷车喷射器（节气门、风道）
1、摇匀气雾剂内容物；
2、对预热后已经熄火的发动机节气门阀体（包括进气道）足量喷洗；
3、启动发动机，高怠速状态维持3-5分钟。

用于综合清洗（汽油箱、输油管、喷油嘴、进气道、火花塞、燃烧室等）
在加油前先从加油口喷入该产品（剂量：每20升汽油内喷10-15秒）即可。





Universal carburetor cleaner.





The product is designed for quick and efficient cleaning of carburetors, injector gate, as well as air and fuel lines. It easily removes all types of contamination (vanish, oil and gasoline films, scales, sediments, and dust) from the fuel system of a car.

• Cleans the carburetor parts (chokes, float chambers, jets, and channels), thus, restoring their initial performances.
  
  
• Restores mobility of injector chokers.
  
  
• Removes contaminations from the air introduction manifold and fuel system.
  
  
• Increases engine power and acceleration.
  
  
  
• Reduces the content of harmful exhausts into the atmosphere.
  
  
• Decreases fuel consumption.
  
  
• Safe for catalytic converters and oxygen sensors.
  
  

APPLICATION INSTRUCTIONS


To clean a carburetor.


1. Take off the air filter.

2. Start the engine.

3. Shake the can.


4. Spray liberally onto all visible carburetor parts. While cleaning, keep up increased engine rpm with a choker lever.



To clean an injector (gate and air line).


1. Shake the can.

2. Spray the CLEANER onto the choker (into the air inlet) while the engine is warm and not working.

3. Start the engine, keep up the increased engine rpm with a choker lever for 3–5 minutes.



For complex cleaning (fuel tank, pipelines, jets, inlet valves, sparkplugs, and combustion chambers).


Before fueling, spray the CLEANER into the filler neck of a fuel tank (for 10–15 seconds for 20 liters of fuel).

BRAKE CALIPER GREASE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

刹车导向座专用润滑脂

简单说明：

刹车导向支座专用高温润滑脂

详细说明：

产品简介：
专门用于防治制动块与导向支座抱死或者卡死的高温润滑脂。

主要功效：
1、确保刹车导向支座机构的工作准确性，包括保证制动块的全接触和解除制动状态的快速灵敏性；
2、延长汽车刹车系统的整体寿命；
3、消除刹车过程中的噪音；
4、提高承载能力；
5、适应温度范围-35-+400℃。

使用方法：
1、拆下刹车导向支座；
2、摇晃气雾剂罐；
3、表面喷上薄薄一层润滑脂；
4、重新装上支座即可。

备注：
在更换制动块或者例行技术检查时进行处理。




Special high-temperature grease applied to prevent sticking and seizing of brake pads on guide fingers of a sliding carriage.

• Provides accurate operation of the whole sliding carriage mechanism, absolute abutment of brake pads and quick unbraking of a brake disc at the end of braking.
  
• Prolongs service life of the whole braking system of a vehicle.
  
• Eliminates noise and creaks when braking.
  
• Resistant to high loads.
  
• Has a wide temperature range of application: –35… 400 °С.
  

APPLICATION INSTRUCTIONS:

1. Twist out the guide fingers of a brake caliper.

2. Shake the can.

3. Apply evenly several layers of the grease (up to 5). Let each layer dry before applying the next one.

4. Assemble the unit.



Note:

Use when replacing brake pads or next maintenance work.

UNIVERSAL SILICON LUBRICANT

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

多功能硅胶润滑脂


简单说明：

多功能粘稠型硅酮树脂润滑脂-喷剂

详细说明：

产品简介：
用于不同材料接头的润滑和松动（包括金属、塑料、橡胶、皮和木材等相互之间的任何组合）。可清除塑料套、滑块、皮带等的摩擦吱吱响声；恢复锁具的工作灵活性。它可作为防腐保存润滑脂用于钢丝绳、拉杆、手柄等受力部件。由于在零部件表面形成多分子硅酮保护层，该润滑脂具有特别优异的防水特性。它还能防止橡胶和塑料件在太阳照晒下龟裂。

主要功效：
1、清洗塑料、橡胶、乙烯类物质的表面并使其翻新；
2、能够恢复仪表控制台光泽，翻新驾驶室乙烯类装饰板，养护橡胶轮胎；
3、恢复密封材料的弹性；
4、防止橡胶件粘附在金属零部件上，恢复密封垫片的德弹性和张力；
5、防止零部件的腐蚀或者氧化；
6、清除潮气和灰尘，干燥电子元器件的接头，形成防静电保护膜；
7、防止汽车车门或者天窗密封条被冻结或者结冰；
8、在冲压或者气焊生产过程中，起到分割和保护零部件的作用。

使用方法：
1、摇晃气雾剂罐；
2、在需要处理部位表面喷上薄薄一层（零部件，接头）；
3、必要时，用抹布擦净；
4、对于被严重污染的表面，重复处理一次.




It lubricates and penetrates into joints made of various materials (metal, plastics, rubber, leather and wood in any combination). It removes the creak of plastic panels, slide-blocks and belts. It restores the easiness of lock work. It is used as a preserving anti-corrosion substance for cables, control-rods and levers. It possesses perfect water-resistant properties due to the formation of multimolecular layer of silicon. It prevents plastic and rubber parts from cracking under the sun.

• Cleans and restores plastic, vinyl and rubber surfaces.
  
• Gives shine and polishes control panels, restores their original color and appearance; restores the appearance of vinyl upholstery and takes care of the rubber tire-covers.
  
• Restores the elasticity of sealing.
  
• Prevents adhesiveness of rubber to metal; restores elasticity of stuffing-boxes.
  
• Protects from corrosion and sunlight.
  
• Displaces moisture and dust, dries electrical contacts and forms the antistatic film.
  
• Prevents freezing and ice-formation of rubber sealing of vehicle doors and hatches.
  
• Separates and protects parts during industrial punching and gas wielding.
  

APPLICATION INSTRUCTIONS:


1. Shake the can.

2. Spray a thin layer onto a work surface (part, joint).

3. If necessary, wipe it with a napkin.

4. In case of severe contaminations, repeat the treatment.

UNIVERSAL PENETRATING LUBRICANT

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。


多功能渗透型润滑脂

简单说明：

多功能渗透型专业润滑脂-喷剂

详细说明：

产品简介：
快速而轻松渗透进丝扣或者其它连接接点，恢复生锈零部件的可松动性。推荐用于汽车修理厂、车库、车间、日常或者工业生产中使用。可润滑任何摩擦表面。

主要优点：
1、可清除汽车表面的油污或者脂迹；
2、防止零部件的腐蚀或者氧化；
3、门锁融冻，预防被冻结；
4、清除进气道中的水分和潮气，在潮湿环境条件下帮助轻松启动发动机。

使用方法：
摇晃气雾剂罐；
在需要润滑部位喷上薄薄一层润滑脂即可。

备注：
对塑料、橡胶和木材无腐蚀性。



The lubricant penetrates easily and quickly into threaded and other joints, returns mobility to rusted parts. It is recommended for application in service stations, garages, shops, household and industry. It can lubricate any friction surface of the parts.

Removes oil and grease contaminations from car body surfaces.

Protects parts from corrosion and oxidation.

Defreezes door-locks and prevents their freezing.

Displaces moisture and eases engine start in damp weather.






APPLICATION INSTRUCTIONS


1. Shake the can.

2. Spray a thin layer onto a work surface (part, joint).



Note

Neutral to plastic, rubber and wood.

ANY WAY GREASE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

ANY WAY 渗透润滑脂

简单说明：

多功能渗透型专业润滑脂-喷剂
内含“摩圣”再生剂

详细说明：

产品简介：
用于各种设备、装置、武器、工具等，可恢复零部件的运动性，快速而轻松渗透进生锈或者固结的接头中，进行有效润滑或者松动处理。它还能防止接触面的腐蚀，而对于橡胶件、木材、塑料、油漆面、磨光面等无任何腐蚀性。它是热爱生活人的真正好帮手！

主要优点：
1、良好的润滑特性，修复磨损表面；
2、在高湿、粉尘、腐蚀性介质（盐溶液，酸，碱）等恶劣环境中，保护零部件不被腐蚀或者生锈；
3、能够吸取潮气，使电器元件接触点保持干燥；
4、是水和潮气的真正障碍，可防止漏电和短路；
5、门锁融冻，恢复其松动性，防止被冻结或者腐蚀；
6、清洗脏物，轻易去除油脂和沥青，清洗浆糊痕迹和蚊虫尸体，预防灰尘和脏污附着；
7、可用于武器的保养，有效清除火药的燃烧产物；
7、保护零部件不被腐蚀和氧化。

使用方法：
1、摇晃气雾剂罐；
2、在距润滑对象10-20cm处喷出润滑脂；
3、对于难于到达的部位可装上专用导流管。




NY WAY greaseUniversal penetrating spray lubricant for different mechanisms. Contains revitalizant.



It is designed for all types of units and mechanisms, weapon, sundry and equipment. It restores the mobility of units and parts; it can penetrate easily and quickly into the rusted or jammed joints, lubricates and separates them. The grease efficiently protects contact places from corrosion. It is neutral to rub¬ber, wood, plastics, lacquer coating and blueing. All-purpose helper!

• Lubricates assembly parts and restores friction surfaces with the help of the unique XADO technology.
  
• Protects from rust and corrosion under conditions of increased humidity, contamination and action of hostile environment (saline, acid solution and alkali).
  
• Displaces moisture and dries the contacts of electric equipment.
  
• Serious barrier for water and moisture. Prevents electrical leaks and shorts.
  
• Defreezes door-locks and restores their mobility, protects them from freezing and corrosion.
  
• Cleans off contamination, easily dissolves grease and tar spots; removes glue residues, insect traces and prevents adhering of dirt and dust.
  
• Takes care of weapon parts and removes the gun powder scale carefully.
  
• Preserves parts and protects them from corrosion and oxidation.
  
  

APPLICATION INSTRUCTIONS

1. Shake the can.

2. Spray onto the treated surface from the distance of 10-20 cm.

3. Use the nozzle for hard-to-reach places.

LITHIUM GREASE FOR CV JOINTS

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

等角速万向节锂基润滑脂

简单说明：

含二硫化钼的等角速万向节专业润滑脂

详细说明：

产品简介：
推荐用于汽车等角速万向节、轴承、装置以及工业设备上。它含有纯净的高分散二硫化钼（MoS2），可为以极限荷载或者（和）交变荷载运转装置或者轴承提供可靠的保护。

主要优点：
1、专门的等角速万向节专业润滑脂；
2、为以极限荷载或者（和）交变荷载运转装置或者轴承提供可靠的保护；
3、机械和化学稳定性极强，使机械设备能够承受长时间高温和超载运行；
4、粘着力强，能够满足大振动和高转速机械设备的润滑要求；
5、防水性好，适合应用于与水接触的润滑部位；
6、在润滑表面形成隔离层，保护零部件不被侵蚀或者弄脏。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限；
有效应用于转速不超过10 000r/min的机械设备。

技术指标：
外观颜色　　 ┉┉┉　　黑色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞180
25℃时针入度，mm-1 ┉┉┉ 285
工作温度，℃ 　
长期 ┉┉┉ ＜130
短时间 ┉┉┉ ＜150

四球机上的润滑性能试验数据，DIN 51350：
磨损系数，mm ┉┉┉ ＜1.65
备注：上表中仅列典型参数

标准：
VERYLUBE等角速万向节锂基润滑脂满足下列标准：
NLGI 2 （ASTM D217）
ISO-L-XCCEB 2 （ISO 6743-9）
KPF2N-25（DIN 51502）




It is recommended for application in constant velocity joints, assemblies and bearings of vehicles as well as industrial equipment. It contains pure superfine molybdenum disulfide (MoS2) owing to which it effectively protects assemblies and bearings operating under peak and/or oscillatory loads.

• Special grease for constant velocity joints.
  
  
• Effectively protects assemblies and bearings operating under peak and/or oscillatory loads.
  
  
• Possesses high mechanical and chemical stability, keeps protective and anti-wear properties even after prolonged mechanical and thermal loads.
  
  
• Owing to strong adhesion, it remains on the lubricated surfaces even under the action of vibration and high rotation speeds.
  
  
• Water-resistant and can be used in assemblies operating in contact with water.
  
  
• Forms good isolation and prevents bearings from contaminations.
  
  

APPLICATION INSTRUCTIONS


With pressurized application. Add the grease through the zerk until desired grease volume is reached.

Manual application. Eliminate the previous grease and fill 1/2 of bearing volume (unit) with LITHIUM GREASE FOR CV JOINTS.




Note:

- Compatible with automotive and industrial lithium greases of all types, and can be mixed with them in any proportion.

- Applied for assemblies with the rotation speed up to 10,000 rpm.






Requirements:

NLGI 2 (ASTM D217)

ISO-L-XСCEB 2 (ISO 6743-9)

KPF2N-25 (DIN 51502)




TECHNICAL INFORMATION:

Color, visually - black

Consistence Class based on NLGI - 2

Penetration at 25 °С, mm-1 - 285

Drop point, °С - >180


Working temperature, °С:

- Long-term - <130

- Short-term - <150

LITHIUM COMPLEX GREASE

汽车交通-是XADO技术最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。


复合锂基专业润滑脂

简单说明：
含有金属调节剂的多功能锂基润滑脂

详细说明：

产品简介：
用于高温或者超负荷设备及装置的润滑及抗磨保护。推荐用于汽车和工业设备的轴承和装置。由于其金属调节剂配方，可大大减少摩擦并降低磨损。

主要优点：
1、确保机械设备能够长时间在高温和超负载条件下运行；
2、极大减少摩擦，降低磨损；
3、节约能源；
4、可作为终身免更换的专门润滑脂使用；
5、能预防零部件的生锈和腐蚀；
6、粘着力强，能够满足大振动和高转速机械设备的润滑要求；
7、具有优异的防潮和防尘性能。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限；
有效应用于转速不超过10 000r/min的机械设备。

技术指标：
外观颜色　　 ┉┉┉　　棕色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞280
25℃时针入度，mm-1 ┉┉┉ 277
工作温度，℃ 　
长期 ┉┉┉ ＜150
短时间 ┉┉┉ ＜200

四球机上的润滑性能试验数据，DIN 51350：
粘结荷载，N ┉┉┉ ＞3000
磨损系数，mm ┉┉┉ ＜0.5
备注：上表中仅列典型参数

标准：
VERYLUBE复合锂基专业润滑脂满足下列标准：
NLGI 2 （ASTM D217）
ISO-L-XBDIB 2 （ISO 6743-9）
KP2K-30（DIN 51502）



It is used to lubricate and protect assemblies and joints operating under heavy thermal and mechanical loads. It is recommended for automotive assemblies and bearings as well as for industrial equipment. Due to the metal conditioner, the grease reduces signi¬ficantly friction losses; it protects the parts from wear.

• Provides reliable lubrication of assemblies and mechanisms under overloads and high temperatures for a long period of time.
  
  
• Significantly decreases friction losses and effectively protects parts from wear.
  
  
• Reduces energy consumption.
  
  
• It is used in assemblies with a single grease filling for the whole period of operation.
  
  
• It prevents formation of rust and corrosion.
  
  
• Owing to strong adhesion, it remains on the lubricated surfaces even with strong vibration and high rotation speeds.
  
  
• Possesses excellent moisture and dust protection properties.
  
  

APPLICATION INSTRUCTIONS


With pressurized application. Add the grease through the zerk until desired grease volume is reached.

Manual application. Eliminate the previous grease and fill 1/2 of bearing volume (unit) with LITHIUM COMPLEX GREASE.



Note

- Compatible with automotive and industrial lithium greases of all types, and can be mixed with them in any proportion.

- Efficient for assemblies with the rotation speed up to 10,000 rpm.




Requirements:

NLGI 2 (ASTM D217)

ISO-L-XBDIB 2 (ISO 6743-9)

KP2N-30 (DIN 51502)




TECHNICAL INFORMATION:

Color, visually - Brown

Consistence Class based on NLGI - 2

Penetration at 25 °С, mm-1 - 277

Drop point, °С - >280


Working temperature, °С:

Long-term - <150

Short-term - <200

Welding load, N - >3,000

Wear index, mm - <0.5

LITHIUM UNIVERSAL GREASE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

多功能锂基专业润滑脂

简单说明：

内含EP（Extreme Pressure）添加剂的多功能润滑脂

详细说明：

产品简介：
用于高温或者超负荷设备或者装置的润滑及抗磨保护，能对各种滑动轴承和滚动轴承进行良好的润滑。由于其高性能EP添加剂配方，可为使用一般锂基脂因磨损过大而无法正常工作的设备提供全面抗磨保护。

主要优点：
1、机械和化学稳定性极强，使机械设备能够承受长时间的高温和超载运行；
2、粘着力强，能够满足大振动和高转速机械设备的润滑要求；
3、防水性好，适合应用于与水接触的润滑部位；
4、在润滑表面形成隔离层，保护零部件不被侵蚀或者弄脏。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限；
有效应用于转速不超过10 000r/min的机械设备。

技术指标：
外观颜色　　 ┉┉┉　　浅棕色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞180
25℃时针入度，mm-1 ┉┉┉ 280
工作温度，℃ 　
长期 ┉┉┉ ＜130
短时间 ┉┉┉ ＜150

四球机上的润滑性能试验数据，DIN 51350：
粘结荷载，N ┉┉┉ ＞3000
磨损系数，mm ┉┉┉ ＜0.5
备注：上表中仅列典型参数

标准：
VERYLUBE多功能锂基专业润滑脂满足下列标准：
NLGI 2 （ASTM D217）
ISO-L-XBCEB 2 （ISO 6743-9）
KP2K-20（DIN 51502）


It is applied to lubricate and protect assemblies and joints operating under high thermal and mechanical loads. It is used to lubricate friction and frictionless bearings of various assemblies and mechanisms. Owing to ЕР (Extreme Pressure) complex, it is capable to protect mechanisms from the destructive wear while operating and when the use of regular lithium greases is not permitted.

• Possesses high mechanical and chemical stability and keeps protective and anti-wear properties even after prolonged mechanical and thermal loads.
  
  
• Owing to the strong adhesive properties, it remains on the lubricated surfaces even under the action of vibration and high rotation speeds.
  
  
• Water-resistant and can be used in assemblies operating in contact with water.
  
  
• Forms good isolation and prevents bearing contamination.
  

APPLICATION INSTRUCTIONS


With pressurized application
Add the grease through the zerk until desired grease volume is reached.

Manual application
Eliminate the previous grease and fill 1/2 of bearing volume (unit) with LITHIUM UNIVERSAL GREASE.



Note

- Compatible with automotive and industrial lithium greases of all types, and can be mixed with them in any proportion.

- Efficient for assemblies with the rotation speed up to 10,000 rpm.





REQUIREMENTS:

NLGI 2 (ASTM D217)

ISO-L-XBCEB 2 (ISO 6743-9)

KP2K-20 (DIN 51502)




TECHNICAL INFORMATION:

Color, visually - Light brown

Consistence Class based on NLGI – 2

Penetration at 25 °С, mm-1 - 280

Drop point, ° С - >180


Working temperature, °С:

Long-term - <130

Short-term - <150

Welding load, Н - >3000

Wear index, mm - <0.5

GUN CONSERVING GREASE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

武器保存专业润滑脂

简单说明：

用于储藏前封存、清洗及润滑处理的专用润滑脂-喷剂
内含XADO再生剂

详细说明：

产品简介：
有很好的保护功能，能确保长时间开放式储存不会被腐蚀。可用于各种口径（大、小）的来复线或者滑膛枪械（猎枪、运动步枪、军用枪械、气枪等）。频繁使用枪支后，推荐用于储藏前的封存处理或者射击后的保养处理。

主要功效：
1、快速进行封存前准备；
2、具有较高渗透能力，能够到达枪械的各个部位；
3、专门的抑制配方，能预防燃烧残留物对枪械的不良作用；
4、优异的低温性能，能确保枪械在-60℃仍能平稳工作；
5、由于XADO再生剂的存在，确保摩擦表面处于理想状态并延长其寿命。

使用方法：
1、摇动气雾剂罐使其混合均匀；
2、在零部件和节点上都均匀喷上薄薄一层该润滑脂-喷剂；
3、必要时，用擦布将其擦净；
4、脏得较严重时，再重复处理一次.



Grease 'Gun conserving'

Modern Conserving grease keeping the arms reliability up to – 60 oC.

Contains revitalizant.

Applied for conserving, cleaning and lubricating the arms before storage.

Ensures high protection of the arms from corrosion even under long-term open-air storage.

Applied to small- and large-calibre rifled and smooth-bore arms of any type (hunting, sporting, fighting, air rifles etc).
Recommended for the after shooting service and preparing the arms for storage.

Has efficient penetrating properties and enters all parts of the arms.

Special corrosion inhibitors of the grease neutralize negative affect of the gomes left after cleaning.

Due to its perfect low-temperature properties the grease ensures mobility and softness of the arms operation up to – 60 oC.


Due to revitalizant the grease keeps the surface of the barrel bore in top condition.

Doesn’t contain alkali, neutral to plastic, wood, colored and lacquered surfaces, blueing.



APPLICATION.

Shake the can.

Spray on the parts and mechanisms of the arms.

The arms do not need deconservation after storage.

GUN CLEANING GREASE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

武器清洗专业润滑脂

简单说明：

日常护理型武器清洗专用润滑脂-喷剂
内含XADO再生剂

详细说明：

产品简介：
用于武器的清洗和润滑，可确保各种武器（猎枪、运动步枪、军用枪械、收藏用品等）的来复线或者滑膛管壁轻松而快速的清洗效果。频繁使用枪支后，建议每天使用该润滑脂-喷剂进行保养，可确保其不被腐蚀。

主要功效：
1、快速去除枪管或者击发装置上手工难于到达部位的脏物；
2、专门的清洗润滑脂配方，在枪管内壁很容易即被火药的燃烧所熔化；
3、能可靠地润滑螺纹、铰接及销钉接头，预防它们的腐蚀；
4、确保枪械处于优异工作性能；
5、由于“摩圣”再生剂的存在，确保摩擦表面处于理想状态。

使用方法：
1、摇动气雾剂罐使其混合均匀；
2、将枪械的所有零部件和机构上都喷上该润滑脂-喷剂；
3、对武器进行清洗。

备注：
1、不含碱性物质，对塑料、木材、颜料及油漆表面、氧化处理表面等无腐蚀作用；
2、无需擦干；
3、对于准备长时间储藏的枪械，建议使用XADO武器保存专业润滑脂.





Grease 'Gun cleaning'

Special modern gun cleaning grease. Contains revitalizant.

Applied for cleaning and lubricating the arms.

Ensures fast and easy cleaning of small- and large-calibre rifled and smooth-bore arms of any type (hunting, sporting, fighting, antique rifles etc).

Recommended to be applied as a daily care for arms in case of frequent shooting (in a rifle range, hunting).



Expels contaminations from the hard-to-reach places of trigger and breech-mechanisms quickly.

Special cleaning components of the grease dissolve the powder deposits in the barrel bore easily.

Lubricates threaded, rotary and pinning joints; protects them from corrosion.


Guarantees perfect operation of the arms.



Due to revitalizant the grease keeps the surface of the barrel bore in top condition.

Doesn’t contain alkali, neutral to plastic, wood, colored and lacquered surfaces, blueing.



APPLICATION

Shake the can.

Spray on the parts and mechanisms of the arms.

The arms do not need to be wiped dry.

XADO GREASE FOR CV JOINTS

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

XADO 等角速万向节润滑脂

　汽车和其它机械设备的等角速万向节、装置和轴承专用润滑脂
内含XADO再生剂
补偿设备的自然磨损

详细说明：

产品简介：
XADO等角速万向节润滑脂是迄今为止最好的等角速万向节专用润滑脂。按照其使用性能，XADO等角速万向节润滑脂远远超越目前市场上任何一种二硫化钼（MoS2）润滑脂。它是以锂基-钙复合稠化剂（ALASSCA complex）为基础，应用现代加工工艺，配以专门的添加剂精制而成。它赋予润滑脂全新的和特别有效的保护功能。

主要功效：
1、是用于等角速万向节球形铰最理想的润滑脂，可降低磨损2-2.5倍；
2、保护罩损坏后，能长时间保护等角速万向节免受潮气和灰尘的损伤；
3、它同时也是各种汽车零部件的超级全能润滑脂产品，如应用于轮毂轴承、球形支座和铰接头、传动系统的万向轴接头、水泵和发电机轴承；它还可用于工业和日用机械设备，如开放式齿形传动机构、各种滚动和滑动轴承、手动磨床的齿轮、炉具等；
4、在各种苛刻条件（极限高负载，超高或者超低速度，高温，粉尘或者高湿环境等）下都能保持优异润滑性能；
5、防止划痕和腐蚀的出现，降低噪音和振动；
6、由于“摩圣”再生剂的存在，确保摩擦表面处于理想状态。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
建议用于新设备或者零部件上；
对于较大幅度的恢复性维修，建议使用XADO恢复型或者修理型润滑脂；
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限。

技术指标：
外观颜色　　 ┉┉┉　　淡黄色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞280
25℃时针入度，mm-1 ┉┉┉ 275
120℃时蒸发度，% ┉┉┉　＜0.65
工作温度，℃ 　
长期 ┉┉┉ ＜135
短时间 ┉┉┉ ＜165

四球机上的润滑性能试验数据，DIN 51350：
粘结荷载，N ┉┉┉ ＞7400
磨损系数，400N，1小时，mm ┉┉┉＜0.7
备注：上表中仅列典型参数

标准：
XADO 等角速万向节润滑脂满足下列标准：
NLGI 2 （ASTM D217）
NLGI GC-LB
ISO-L-XBCIB 2 （ISO 6743-9）
KOG2K-20（DIN 51502)


XADO
CV Joint Grease is the perfect grease for
Constant Velocity Joints
and will reduce wear by 2 to 2.5 times. 
XADO CV Joint Grease is formulated for lubrication and
effective wear protection and due to XADO Revitalizant, the
protective cermet layer grows on the crystal lattice of the
metal surface. It is a superuniversal grease: applied to all
car units (vehicle hub bearings, ball bearings
and hinges, cardan joints of transmission, bearings of pump
and generator). It is also used in joints of industrial
and household equipment (open gearings, sliding
and frictionless bearings, pinions of manual polishing
machines, chains etc).  It is also compatible with
automotive and industrial lithium greases of all types, can
be mixed with them in any proportion.

Advantages

This XADO grease is the best grease for constant
velocity joints. Due to the high-performance parameters XADO
grease exceeds any other greases that contain MoS2.

• perfect grease for
  constant velocity joints, reduces wear by 2-2.5 times
  
• protects constant
  velocity joints from moisture and contaminations for a
  long time in case the duster is damaged
  
  
• super universal
  grease: applied to all car units (marine bearings,
  ball bearings and hinges, cardan transmission joints,
  bearings of pump and generator). It is also used in
  industrial and household equipment joints (open
  gearings, sliding and frictionless bearings, pinions
  of manual polishing machines, chains etc)
  
• compatible with
  automotive and industrial lithium greases of all
  types, can be mixed with them in any proportion.
  
• the grease keeps
  perfect lubricating properties under any operating
  mode (extremely heavy loads, high and low shear rate,
  high temperatures, dust level and moisture)
  
• prevents formation of
  scratches and corrosion, reduces noise and vibration
  
• due to atomic
  revitalizant the grease keeps joint surfaces in top
  condition


• 
  
  XADO grease for CV
  joints doesn’t form abrasive and aggressive acids.
  

XADO grease for CV joints meets the requirements:

NLGI 2 (ASTM D217)

NLGI GC-LB ISO-L-XBCIB 2 (ISO 6743-9)


KOG2K-20 (DIN 51502)



Application

manual application

Remove the old grease and fill 1/2 of the bearing
(unit) volume with the grease.



with pressurized application


Add the grease through the zerk until desired grease
volume is reached.



Recommended for new joints and mechanisms. Use XADO
“Restoring” and “Repairing” greases for
essential restoring repair.

XADO
grease for CV joints meets the requirements:

NLGI 2 (ASTM D217)

NLGI GC-LB ISO-L-XBCIB 2 (ISO 6743-9)


KOG2K-20 (DIN 51502)

XADO GREASE "XADO 20K PROTECTIVE"

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

XADO特殊润滑脂

XADO 高温润滑脂用于在高温环境下工作的工业设备修理、恢复和抗磨保护
XADO 高速润滑脂用于以高转速运行的工业设备修理、恢复和抗磨保护
内含“摩圣”再生剂


详细说明：

XADO 20K保护型
全合成高速润滑脂，修复10%的磨损
专门用于转速20 000r/min以下设备和装置的抗磨保护。



Grease 'Protective-20K'

High-speed grease XADO “Protective-20K” is recommended to be used instead of regular grease in joints and mechanisms operating at the rotation speed up to 20,000 rpm. High-speed grease XADO “Protective-20K” is designed to protect new joints and mechanisms from wear and to restore the units with wear degree up to 10%. XADO Revitalizant containing in the grease forms strong cermet layer on the friction surfaces and extends service life of the bearing units by 3-4 times. It shows high adhesive and anticorrosive characteristics. Application of grease XADO “Protective-20K” in high-speed units allows minimizing costs, connected with the frequent equipment breaks, scour and change of bearing units. High-speed grease XADO “Protective-20K” decreases noise and vibration level in the bearing units.
Note! It is inadmissible to mix greases “20K” and “60K”.

Colour: from light to deep brown
Thickener/Base Oil: complex Ca - soap/synthetic hydrocarbons
Penetration: 220-245
Category temperature range °C: -40...+180

XADO GREASE "XADO - 300"

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

XADO特殊润滑脂

XADO 高温润滑脂用于在高温环境下工作的工业设备修理、恢复和抗磨保护
XADO 高速润滑脂用于以高转速运行的工业设备修理、恢复和抗磨保护
内含“摩圣”再生剂


详细说明：

产品简介：
XADO-300
全合成高温润滑脂
专门用于低转速（500r/min以下）、大负载的轴承设备，如制砖及铸造车间、化学及采矿工业专用设备等。该润滑脂的最高工作温度+300℃。




Grease 'XADO 300'

High-temperature grease XADO-300 is quite stable to corrosion under long high temperatures and hostile environment. It is recommended for application in bearing units of low-speed and heavy-loaded mechanisms and units of brick and foundry industry, in the equipment of metallurgical, chemical and ore mining and processing enterprises, operating under temperatures up to 3000C. Due to XADO Revitalizant XADO-300 compensates wear up to 30% and effectively protects against wear due to the formation of protective cermet coating on friction surfaces. Fox example, the application of XADO-300 in low-speed bearings of bakery’s rotary ovens, which operate under temperatures up to 2800C and humidity up to 85%, ensured their perfect and stable operating during 6 months (2640 hours).

Colour: pink
Thickener/Base Oil: Inorganic thickener/mineral Oil
Category temperature range °C: -60...+300

XADO GREASE "XADO - 250"

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

XADO特殊润滑脂

XADO 高温润滑脂用于在高温环境下工作的工业设备修理、恢复和抗磨保护
XADO 高速润滑脂用于以高转速运行的工业设备修理、恢复和抗磨保护
内含“摩圣”再生剂

详细说明：

产品简介：
XADO-250
矿物类高温润滑脂
推荐用于转速在36 000r/min以下的滚动和滑动轴承，如面包房及糖果车间的传送带和炉具；干燥筒；金属热化学加工设备等。该润滑脂的最高工作温度+250℃。


Grease 'XADO 250'

High-temperature grease XADO-250 is formulated for the units operating under temperatures up to 250°Ñ. It ensures heat abstraction and carries high speed of rotation (up to 36,000.00 rpm). XADO-250 removes corrosion points on the friction pairs of bearings. It is quite stable to the hostile environment. Due to XADO Revitalizant XADO-250 compensates 30% wear, protects mechanisms, and also extends the service life of the bearings by 4 times.

It is recommended to be used for the friction and frictionless bearings of the conveyers, baking and confectionery ovens, in the bearings of the drying cylinders, in the flatting equipment and in the equipment for chemicothermal metal treatment.

For example in the paperboard plant, at the 96% humidity and under temperature 190 °C a bearing unit of drying cylinder had operated with XADO-250 for 1850 hours.

Colour: deep-brown
Thickener/Base Oil: Inorganic thickener/mineral Oil
Category temperature range °C: -10...+250

XADO GREASE REPAIRING

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。

修理型润滑脂

　多功能润滑脂 内含“摩圣”再生剂
修复80%的磨损

详细说明：

产品简介：
XADO修理型润滑脂用于大负载机械设备的维修。它能在摩擦表面形成金属陶瓷保护层，恢复零部件的原始形状和几何尺寸。使用该润滑脂可以修复那些按照常规方法已经无法维修的高速和重载设备摩擦零部件。它还可以通过混合使用，将维修功能延伸至任何其它设备指定用润滑脂上。
XADO修理型润滑脂是国际发明专利产品，其中含有“摩圣”再生剂和EP（Extreme Pressure）极压添加剂。

主要功效：
1、补偿不超过80%的磨损；
2、恢复零部件的原始几何尺寸；
3、消除划痕和微裂纹；
4、降低振动和噪音；
5、消除表面缺陷和腐蚀痕迹；
6 、使设备具有承受高转速的能力；

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
对于需周期性更换润滑脂的设备，建议以后使用XADO保护型润滑脂；
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限；
特别有效于轴承设备的维修（转速不超过10 000r/min）；
不要用于新设备或者零部件！

技术指标：
外观颜色　　 ┉┉┉　　红色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞186
25℃时针入度，mm-1 ┉┉┉ 265
120℃时蒸发度，% ┉┉┉　＜1.72
工作温度，℃ 　
长期 ┉┉┉ ＜130
短时间 ┉┉┉ ＜150

四球机上的润滑性能试验数据（20±5℃）：
粘结荷载，N ┉┉┉ ＞2195
极限荷载，N ┉┉┉ ＞823
磨损系数，mm ┉┉┉ ＜0.75
备注：上表中仅列典型参数

标准：
XADO 修理型润滑脂满足下列标准：
NLGI 2 （ASTM D217）
ISO-L-XBCEB 2 （ISO 6743-9）
KP2K-20（DIN 51502）




XADO
"Repairing" Grease is designed to
protect and restore units and mechanisms operating under
heavy loads. XADO Repairing grease forms a new cermet layer on
friction surfaces: the parts grow in volume, restore their
original geometry. It is also applied as a machinery
grease for restoring of
high-speed and heavy loaded units which cannot be repaired
in a regular way.



Advantages

• rejects heat from
  friction areas;


• eliminates scratches
  and microcracks;


• can stand high
  rotation speed;


• reduces noise and
  vibration;


• compensates 80% wear;


• eliminates corrosion
  and protects units from hostile environment.

Technical characteristics

The patented formula of this modern Repairing grease is based on
a composition of XADO revitalizant and EP complex (Extreme
Pressure).



Recommendations of mechanics:

From the experience of revitalization of water pumps.

As
you know, water pumps in foreign cars are not filled with
the grease while operating. That is why you should
dismantle the pump, drill a hole in its body and remove
the old machinery grease with the help of compressed air.

Then add a
small amount of XADO “Repairing”
Grease (1-2 ml) into
the cavity of the pump body and fill half of the remaining
cavity with XADO "Repairing" Grease.

Upon completion
seal the hole
with any heat-resistant sealing material. Lay the the pump
for 20 minutes in both sides, then you can install the
pump into the car.



Method of application:

Remove the old grease.

Fill 1/2 of unit volume with XADO Grease “Repairing”.


If the unit requires the machinery grease to be changed periodically, you should
use XADO Protecting Grease later on.



Note!

The grease is especially effective for repair of quite
worn bearings (up to 10,000 rpm). Do not use for new
assemblies and parts!



Colour: red


Thickener/Base Oil: Li-soap/Mineral Oil

Penetration: 230-295

Category temperature range °C: -40...+120

XADO GREASE RESTORING

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。


恢复型润滑脂

　多功能润滑脂 内含XADO再生剂
修复50%的磨损

详细说明：

产品简介：
XADO恢复型润滑脂用于大负载机械设备的恢复。它能在摩擦表面形成金属陶瓷保护层，恢复零部件的原始形状和几何尺寸，延长零部件使用寿命2-4倍。
XADO恢复型润滑脂是国际发明专利产品，其中含有“摩圣”再生剂和EP（Extreme Pressure）极压添加剂。

主要功效：
1、快速修复磨损；
2、补偿不超过50%的磨损；
3、延长设备使用寿命；
4、消除划痕和微裂纹；
5、降低振动和噪音；
6、使设备具有承受高转速能力；
7、消除表面缺陷和腐蚀痕迹。


使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
该润滑脂的特长是对轴承提供全面抗磨损保护（转速不超过10 000r/min）；
对于需周期性更换润滑脂的设备，建议以后使用XADO保护型润滑脂；
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限。

技术指标：
外观颜色　　 ┉┉┉　　绿色
NLGI 稠度级别　　┉┉┉　 3
点滴温度，℃　 　┉┉┉　 ＞193
25℃时针入度，mm-1 ┉┉┉ 255
120℃时蒸发度，% ┉┉┉　＜0.65
工作温度，℃ 　
长期 ┉┉┉ ＜130
短时间 ┉┉┉ ＜15

四球机上的润滑性能试验数据（20±5℃）：
粘结荷载，N ┉┉┉ ＞2068
极限荷载，N ┉┉┉ ＞980
磨损系数，mm ┉┉┉ ＜0.7
备注：上表中仅列典型参数

标准：
XADO 恢复型润滑脂满足下列标准：
NLGI 3 （ASTM D217）
ISO-L-XBCEB 3 （ISO 6743-9）
KP3K-20（DIN 51502）

包装：
400毫升：气雾剂罐；




Grease 'Restoring'

XADO Grease “Restoring” is designed for restoring of units and mechanisms operating under heavy loads. The grease forms a new cermet layer on friction surfaces: the parts grow in volume and restore their original geometry. It extends the life span of the parts considerably.



Advantages

• eliminates wear quickly;
  
• prolongs life span of units;
  
• eliminates scratches and microcracks;
  
• reduces noise and vibration;
  
• rejects heat from friction areas;
  
• can stand high rotation speed;
  
• compensates 50% wear;
  
• eliminates corrosion and protects units from hostile environment.
  

Technical characteristics

The patented formula of this up-to-date grease is based on a composition of XADO revitalizant and EP complex (Extreme Pressure).




Practical experience:


The main object of any tube-rolling mill is a tube mill. A gear of the driving unit of tube mill “Ural-2M” set at Dnepropetrovsky tube-rolling mill was produced more than 30 years ago. It expended its resource during years of operation. Wear of gears was about 30% in thickness!

The gear surface was covered with scratches and bubbles 4 mm deep.

The wear progressed, the unit needed urgent repair. But the production of this equipment was stopped in Ural. They asked other plants for assistance but after having studied the construction of the equipment they realized that they could not help. The engineers of one plant agreed to manufacture the needed units but their production would take 3 years.

For that the engineers had to invent something in order to stop the wear of the tube mill and keep the unit in a working condition at least for three years until a new gear for this unit was produced. Thus revitalization was the only possible way to solve the problem. The gear was treated with XADO grease Restoring and operated in a regular mode.

The unit was stopped in 526 hours of operating. After having examined the gear it turned out that the gear started to recover! Small scratches and bubbles on the gear surface disappeared, the wear was stopped! The measurements showed that a cermet layer - 400-600 mkm thick (more than half a millimeter) - was formed on the surfaces of the gears.

As a result the plant had not only a three years reserve but also improved performance level of the mechanism.
For example the electricity consumption reduced by 26,6% at idling and by 12,5% under loads.



Method of application:

Remove the old grease.


Fill 1/2 of unit volume with XADO Grease “Restoring”.



Note!

The grease is especially effective for restoration and protection of bearings from wear (up to 10,000 rpm).
If assembles require periodical grease changing you should use XADO Grease “Protective” later on.


Colour: green
Thickener/Base Oil: Li-soap/Mineral Oil
Penetration: 220-250
Category temperature range °C: -40...+120

XADO GREASE PROTECTIVE

XADO技术，通过正常使用条件下在金属摩擦副表面原位生成金属陶瓷层，实现对各种机械设备和车辆的免拆精修、节能环保改造、延长寿命处理等。


保护型润滑脂

　多功能润滑脂 内含XADO再生剂
修复10%的磨损

详细说明：

产品简介：
XADO保护型润滑脂用于大负载机械设备的保护，防止摩擦表面磨损。它能消除新造滚动轴承的制造缺陷；延长零部件使用寿命2-4倍。
XADO保护型润滑脂是普通多用途锂基润滑脂的替代品。这一现代配方技术润滑脂拥有国际发明专利，其中含有“摩圣”再生剂和EP（Extreme Pressure）极压添加剂。

主要功效：
1、延长设备使用寿命；
2、修复不超过10%的磨损；
3、消除划痕和微裂纹；
4、降低振动和噪音；
5、降低表面粗糙度Ra至8纳米；
6、节约电能消耗。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
该润滑脂的特长是对轴承提供抗磨损保护（转速10 000r/min）；
建议用于新的轴承或者其它零部件；
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限。

技术指标：
外观颜色　　 ┉┉┉　　橙色
NLGI 稠度级别　　┉┉┉　 3
点滴温度，℃　 　┉┉┉　 ＞189
25℃时针入度，mm-1 ┉┉┉ 257
120℃时蒸发度，% ┉┉┉　＜0.2
工作温度，℃ 　
长期 ┉┉┉ ＜130
短时间 ┉┉┉ ＜150

四球机上的润滑性能试验数据（20±5℃）：
粘结荷载，N ┉┉┉ ＞2450
极限荷载，N ┉┉┉ ＞1039
磨损系数，mm ┉┉┉ ＜0.6
备注：上表中仅列典型参数

标准：
NLGI 3 （ASTM D217）
ISO-L-XBCEB 3 （ISO 6743-9）
KP3K-20（DIN 51502）


包装：
400毫升：气雾剂罐；




Grease 'Protective'

XADO Grease Protective is applied for protection of units and mechanisms operating under heavy loads. This grease is a universal substitute for all consistent greases and protects surfaces from wear. Removes factory defects of new frictionless bearings. Extends the life span of the parts considerably.



Advantages

• extends life span of joints;
  
• compensates 10% wear;
  
• restores scratches and microcracks;
  
• reduces noise and vibration;
  
• improves the treatment coefficient Ra up to 0,06 mkm;
  
• rejects heat from friction area;
  
• protects units from hostile environment.
  

Technical characteristics

The patented formula of this up-to-date grease is based on a composition of XADO revitalizant and EP complex (Extreme Pressure).



Method of application:


Remove the old grease.

Fill 1/2 of unit volume with PROTECTIVE grease XADO.



Note.

The grease is especially effective for protection of bearings from wear (up to 10,000.00 rpm).
Recommended for new assemblies and parts.




Colour: from biscuit to orange
Thickener/Base Oil: Li-soap/Mineral Oil
Penetration: 195-250
Category temperature range °C: -40...+120