LITHIUM COMPLEX GREASE

汽车交通-是XADO技术最主要的应用领域之一。今天您有可能在正常使用条件下完成对爱车的修复（养护），并使摩擦零部件恢复制造厂家的原始尺寸。


复合锂基专业润滑脂

简单说明：
含有金属调节剂的多功能锂基润滑脂

详细说明：

产品简介：
用于高温或者超负荷设备及装置的润滑及抗磨保护。推荐用于汽车和工业设备的轴承和装置。由于其金属调节剂配方，可大大减少摩擦并降低磨损。

主要优点：
1、确保机械设备能够长时间在高温和超负载条件下运行；
2、极大减少摩擦，降低磨损；
3、节约能源；
4、可作为终身免更换的专门润滑脂使用；
5、能预防零部件的生锈和腐蚀；
6、粘着力强，能够满足大振动和高转速机械设备的润滑要求；
7、具有优异的防潮和防尘性能。

使用方法：
使用专用加油枪加注时，通过油枪口直接将润滑脂挤入所要润滑的设备，直至润滑脂到达润滑部位的空隙为止；
手工涂抹时，先清除旧润滑脂，然后用新润滑脂填充轴承空腔至一半即可。

备注：
可与各种汽车或者工业设备锂基润滑脂混合使用，比例不限；
有效应用于转速不超过10 000r/min的机械设备。

技术指标：
外观颜色　　 ┉┉┉　　棕色
NLGI 稠度级别　　┉┉┉　 2
点滴温度，℃　 　┉┉┉　 ＞280
25℃时针入度，mm-1 ┉┉┉ 277
工作温度，℃ 　
长期 ┉┉┉ ＜150
短时间 ┉┉┉ ＜200

四球机上的润滑性能试验数据，DIN 51350：
粘结荷载，N ┉┉┉ ＞3000
磨损系数，mm ┉┉┉ ＜0.5
备注：上表中仅列典型参数

标准：
VERYLUBE复合锂基专业润滑脂满足下列标准：
NLGI 2 （ASTM D217）
ISO-L-XBDIB 2 （ISO 6743-9）
KP2K-30（DIN 51502）



It is used to lubricate and protect assemblies and joints operating under heavy thermal and mechanical loads. It is recommended for automotive assemblies and bearings as well as for industrial equipment. Due to the metal conditioner, the grease reduces signi¬ficantly friction losses; it protects the parts from wear.

• Provides reliable lubrication of assemblies and mechanisms under overloads and high temperatures for a long period of time.
  
  
• Significantly decreases friction losses and effectively protects parts from wear.
  
  
• Reduces energy consumption.
  
  
• It is used in assemblies with a single grease filling for the whole period of operation.
  
  
• It prevents formation of rust and corrosion.
  
  
• Owing to strong adhesion, it remains on the lubricated surfaces even with strong vibration and high rotation speeds.
  
  
• Possesses excellent moisture and dust protection properties.
  
  

APPLICATION INSTRUCTIONS


With pressurized application. Add the grease through the zerk until desired grease volume is reached.

Manual application. Eliminate the previous grease and fill 1/2 of bearing volume (unit) with LITHIUM COMPLEX GREASE.



Note

- Compatible with automotive and industrial lithium greases of all types, and can be mixed with them in any proportion.

- Efficient for assemblies with the rotation speed up to 10,000 rpm.




Requirements:

NLGI 2 (ASTM D217)

ISO-L-XBDIB 2 (ISO 6743-9)

KP2N-30 (DIN 51502)




TECHNICAL INFORMATION:

Color, visually - Brown

Consistence Class based on NLGI - 2

Penetration at 25 °С, mm-1 - 277

Drop point, °С - >280


Working temperature, °С:

Long-term - <150

Short-term - <200

Welding load, N - >3,000

Wear index, mm - <0.5